您好,欢迎访问济南泽楷机械制造有限公司主营升降机齿条 !

济南泽楷机械制造有限公司

主做升降机齿条生产研发,保障质量 , 诚信合作

全国服务热线

13954137663

  • 3
  • 2
  • 1
    热门关键词: 齿条展示 生产车间
    当前位置:首页>新闻资讯>新闻动态>齿条升降机引用的方法有哪些?

    齿条升降机引用的方法有哪些?

    来源:http://www.jnzkjx.cn/ 日期:2020-07-09 发布人:kaizejixie
    齿条是升降机应用中比较重要的一个一部分,并且在应用中常常应用到,如果是那一个发层面沒有注意到得话,还非常容易被断裂,花销的花费也是十分价格昂贵的,因此在平时的应用中除开要留意平常的维护保养以外,更要留意应用的方法。下面济南泽楷机有限公司来为大家介绍一下:
    Rack is an important part of rack elevator application, and it is often used in application. If it is not noticed, it is also very easy to be broken, and the cost is also very expensive. Therefore, in the usual application, in addition to paying attention to the ordinary maintenance, we should pay more attention to the application method. Now Jinan Zekai Machine Co., Ltd. will introduce to you:
    升降机齿条在运送全过程中摔裂,齿条原材料为60钢,其终热处理状态为淬火后超低温回火。对破裂齿条断裂面开展外部经济观查和能谱分析,数据分析齿条合金成分,并对其成分和物理性能开展剖析,搜索其破裂无效的缘故
    The rack of rack elevator is cracked in the whole process of transportation. The raw material of rack is 60 steel, and its final heat treatment state is ultra-low temperature tempering after quenching. The external economic observation and energy spectrum analysis were carried out on the fracture surface of the cracked rack. The composition of the rack alloy was analyzed by data analysis. The composition and physical properties of the rack alloy were analyzed to search for the reason of its failure
    齿条升降机齿条一般选用高碳钢碳素钢或高合金钢生产制造,其终热处理状态为淬火后超低温回火,齿条显微镜机构状态对齿条特性具备关键的危害。因而,剖析与防止因显微镜机构不过关而造成的预制构件常见故障,具备关键的工程项目实际意义。
    The rack of rack elevator is usually made of high carbon steel or high alloy steel, and its final heat treatment state is ultra-low temperature tempering after quenching. The status of rack microscope mechanism has a key harm to the characteristics of rack. Therefore, it is of practical significance to analyze and prevent the common faults of prefabricated components caused by the failure of microscope mechanism.