您好,欢迎访问济南泽楷机械制造有限公司主营升降机齿条 !

济南泽楷机械制造有限公司

主做升降机齿条生产研发,保障质量 , 诚信合作

全国服务热线

13954137663

  • 3
  • 2
  • 1
    热门关键词: 齿条展示 生产车间
    当前位置:首页>新闻资讯>新闻动态>齿条磨齿机几大关键技术

    齿条磨齿机几大关键技术

    来源:http://www.jnzkjx.cn/ 日期:2020-06-20 发布人:kaizejixie
    1、技术
    1. Efficient technology
    1)因齿条的特殊性,磨齿砂轮一般较宽,一次磨削多个齿槽,此时,磨削负载较大,需要机床刚性足够好,主轴功率足够大。
    1) Because of the particularity of the rack, the grinding wheel is generally wide, grinding multiple teeth at a time. At this time, the grinding load is large, the rigidity of the machine tool is good enough, and the power of the spindle is large enough.
    2)工作台面足够宽,可以实现一次装夹加工多根齿条,这也要求机床具备足够的刚性。
    2) The worktable is wide enough to realize the clamping and processing of multiple racks at one time, which also requires the machine tool to be rigid enough.
    3)采用单片小圆角金刚滚轮,可以满足任意模数,任意齿面要求(有无倒角、非标齿条等)齿条砂轮的自动修整,极大地降低了用户使用成本和操作难度。
    3) The single-chip small fillet diamond roller can meet the requirements of any module and any tooth surface (with or without chamfering, non-standard rack, etc.) for the automatic dressing of rack wheel, which greatly reduces the user's use cost and operation difficulty.
    2、AE技术 AE技术实际上是一种声发射传感器的应用,通过AE技术可以实现工件的自动对中,加工自动余量检测与加工余量分配等,另外AE也是防止撞机的重要技术手段。
    2. AE technology AE technology is actually an application of acoustic emission sensor. Through AE technology, automatic workpiece alignment, automatic machining allowance detection and machining allowance allocation can be realized. In addition, AE technology is also an important technical means to prevent collision.
    3、动平衡技术 动平衡是所有磨削类机床通用的技术,砂轮主轴动平衡不好,会直接影响工件磨削精度,会造成机床加工振动大,磨削精度差。
    3. Dynamic balance technology dynamic balance is a common technology for all grinding machine tools. The poor dynamic balance of the grinding wheel spindle will directly affect the grinding accuracy of the workpiece, which will cause the machining vibration of the machine tool and poor grinding accuracy.
    4、在机检测技术 通过在机检测可以快速输出检测报告,并可根据检测结果进行补偿加工,极大的缩短了由加工——三坐标检测——调整机床——再加工的过程。
    4. In machine detection technology can quickly output the detection report through in machine detection, and can compensate processing according to the detection results, greatly shortening the process of processing, three coordinate detection, adjustment of machine tools and reprocessing.
    5、智能化的工艺软件 机床操作工更关注的是机床的易用性,磨齿机必须具备直观易操作的人机界面、智能化的防错机制与智能化工艺操作流程。
    5. Intelligent process software machine operators pay most attention to the ease of use of machine tools. Gear grinding machine must have intuitive and easy to operate human-machine interface, intelligent error prevention mechanism and intelligent process operation flow.